Irradiance reference sensors
PV-Engineering offers compatible irradiance sensors for its PVe Peak Meters, tailored to various purposes and requirements (such as continuous or long-term measurements). All irradiance sensors are of high quality and have been tested with the PVe Peak Meters. PV-Engineering has been cooperating with these manufacturers for many years.
Attention:
Each PVe Peak Meter comes with a single beam reference sensor.
M+T Si
Description
Calibrated irradiation reference sensor, Pt1000, 10m connection cable, PVPM connector Amphenol, Al housing, calibration certificate
Selection: mono-/polycrystalline, KG filter, standard connector type: Amphenol
- Order number
- M+T Si-KGFilt-A
- M+T Si-Mono-A
- M+T Si-Poly-A
ISE Fraunhofer
Description
The outdoor precision references from the Fraunhofer ISE in Freiburg offer one of the highest accuracies available on the market. These sensors are available with or without an absorption filter, making them suitable for referencing different technologies. The sensor can also be equipped with an RTD temperature sensor for cell temperature compensation.
- Order number
- on request
SOZ-03 MONO
Description
Irradiance reference sensor with a monocrystalline cell, Pt1000 temperature sensor, factory calibration certificate included, stainless steel clamp mount, and 10m cable.
- Order number
- NES SOZ-03-Mono
SOZ-03 POLY
Description
Irradiance reference sensor, polycrystalline cell, Pt1000 temperature sensor, with factory calibration certificate, including stainless steel clamp mount, with 10 m cable.
- Order number
- NES SOZ-03-Poly
Accessories for PVe Peak Meter
From extension cables to cases and locks – here you will find the right accessories for your PVe Peak Meter.
Attention!
All cables you need to take measurements are included in the scope of delivery of our PVe Peak Meter.
Temperature Sensor Module RTD PT100
Description
The external module temperature sensor is used to measure the temperature of the backside of the module. For this purpose, an RTD PT100 with an accuracy class of 1/3 DIN is employed.
- Order number
- PVPM-Pt100-OFS/10-A (1500V)
- PVPM-Pt100-OFS/10 (1000V)
- Spare part PT100 sensor
4-wire measuring cable
Description
4-wire power measuring cable (set red/black) for the PVPM 1000 V / 1500 V, 1.5 mm² / 2.5 mm², length 10 m (others on request). This measuring cable connects the PVPM measuring device for the measurement with the module or string to be tested.
- Order number
- 1000V, 20A: PVPM-1000/1.5
- 1000V, 40A: PVPM-1000/2.5
- 1500V, 20A: PVPM-1500/1.5
- 1500V, 40A: PVPM-1500/2.5
extension cable
Description
The extension cable for the external surface sensor PT100 can be used if the standard 10-meter connection cable is not sufficient. The total length of the sensor connection cable should preferably not exceed 25 meters.
- Order number
- PVPM-SKV8
- PVPM-SKV8-A (PVPM1500X)
Four-wire extension cable
Description
4-wire extension (set red/black) for the power measurement lead of the PVPM 1000V 20A/40A, 1.5 mm² / 2.5 mm². Standard length: 10 m. Thanks to the 4-wire technology, no adjustment on the measuring device is required. Custom dimensions available on request.
- Order number
- 20A: PVPM-AKV/1.5
- 40A: PVPM-AKV/2.5
extension cable
Description
The extension cable for the external surface sensor PT100 can be used if the standard 10-meter connection cable is not sufficient. The total length of the sensor connection cable should preferably not exceed 25 meters.
- Order number
- PVPM-SKV 4
- PVPM-SKV 4-A (PVPM1500X)
crocodile clip set
Description
2 pcs crocodile clips red/black (max. 1500V/20ADC) to MC4 connector male/female
25 cm
- Order number
- PVPM-aligator
test probes
set
Description
2 pieces test probes red/black (max. 1500V/40ADC) on MC4 connector male/female
25 cm
- Order number
- PVPM-testtip
External desktop power supply
Description
External desktop power supply MeanWell, In 90-264VAC, Out 15VDC 3.3A, incl. CEE power cable black
- Order number
- PowerSup-MeanWell15V
USB-
cable
Description
PVPM-USB Mini Cab
- Order number
- PVPM-USB Mini Cab
External load-break switch
Description
External load disconnect switch (4-pole), 1500V/20ADC or 1000V/50ADC, housing IP65, for use in PVPM measurement leads, 4mm safety lab plugs/sockets
- Order number
- PVPM-LTSX1500
unlocking tool
Description
1 piece unlocking tool for MC4 connector
- Order number
- MC4 release tool
PELI Padlock
TSA
Description
TSA (Transportation Security Administration) certified lock with 3-digit combination. Can be opened and relocked with TSA special key during security checks (USA only). Fits larger Peli Case.
Weight: Weight: about 0.1kg
- Order number
- PELI Case Lock
Case
for accessories
Description
The aluminum case for PVPM accessories. Interior foam padded. With comfortable handle, two locks for safe transport and a sturdy aluminum frame.
- Order number
- PVPM-TK-AL
Case
Peli Case 1650
Description
The PELI Case 1650, with grid foam insert, is a specially padded transport case for the PVPM devices.
inner dimensions:
725 mm x 445 mm x 270 mm
External dimensions:
802 mm x 520 mm x 316 mm
Weight: about 13 kg
- Order number
- PELI Case 1650
Complete accessory set
Description
Complete accessory set for a PVPM in an aluminum case including:
• Radiation reference sensor NES SOZ-03 (Pt1000), monocrystalline, cable 10 m, PVPM connectors
• Temperature surface sensor Pt100, cable 10 m, PVPM connector
• 4-wire measuring cable 10m
• External power supply with wide range input, power cable
• Short-circuit plug for unused module temperature input
• USB-Kabel 1,5 m
• User manual
• Case for cable and sensor
• PVPM-LTSX1500, external load break switch 1500 V
- Order number
- PVPM-TK-complete
